Research in Motion Paper Example | Topics and Well Written Essays - 500 words

In Motion - Research Paper Example This enhances timely reception and delivery of messages which improve efficiency in business processes. Using this approach, the company introduced the Blackberry as its core product which had a good market reception upon introduction (McQueen, 2010). Despite initial surges in profits, RIM’s products have not remained competitive because of increasing competition from other companies offering better communication platforms and gadgets. Email and SMS have been outdated with introduction of better and more sophisticated communication devices. Samsung Electronics has its Galaxy line of products that allow for direct, video conferencing which enables two people to communicate, via a network, from two different locations. This decline in revenue started in 2011 has made it adopt some survival tactics to remain competitive by reducing operational costs. The company, initially lauded as a high recruiter, shed off 2000 workers in one instance in 2011 thereby drastically reducing its human resource capabilities. Layoffs do not give a company a good image as there are many employees who initiate criminal litigations to demand for their right to stay at their places of service. RIM has organized its employees in teams; this is delegating overall tasks to groups of workers who identify management issues and address them. According to McQueen (2010), one thing lacking in RIM is application of a harmonious working relationship, with effective communication channels among existing employees. This is to improve this teamwork only shown in writing, in the organization’s website. It has had numerous conflicts; a worker wrote a letter to the board of directors in June, 2011 accusing the CEO of having lost direction of the company. The following are human resource initiatives the company should incorporate to remain relevant in an increasingly competitive telecommunications market: The company

LOVE Les Mis Essay Example | Topics and Well Written Essays - 1000 words

LOVE Les Mis - Essay Example The awards included best musical and best original score. This was a difficult play to mount as the whole story is sung through by the performers. Due to the sheer volume of the songs contained in this two act play, my analysis of Les Miserables shall concentrate on only 6 songs. These songs are: Les Miserables is a story of broken dreams and loss of hope. Life is hard and for a woman like Fantine, who started off as a worker and then ended up a prostitute with a daughter whom she entrusted to Valjean on her deathbed, this song from Act 1 of the play conveys the childlike innocence that one wishes to carry throughout life but always surrenders due to the reality of the situation. This sentiment can be clearly seen in the sheer optimism of the song during its early part but then we find out that â€Å"hope was high† and â€Å"time has gone by†. Fantine also dreamed that â€Å"love would never die† and â€Å"God would be forgiving† with the longing of a child. As the whimsical wondering of a child gave in to a reckless youthful love and its harsh realities, Fantine in the end realizes that life as she dreamed it and how it really was. She sadly sings that her life is: In contrast to the heavy emotions of Fantine in â€Å"I Dreamed a Dream†, â€Å"Master Of the House† is a much livelier and lighter song from the first act. It is performed by Thenadier at Thenaiders Inn. In the song, we see how business was done during this particular era. This Act I song has Thenadier enticing clients to stay at his inn because he is unlike other businessmen who: Charge them for the lice... extra for the mice... two percent for looking in the mirror twice... here a little slice... there a little cut...three percent for sleeping with the window shut...when it comes to fixing prices... In reality Thenadier is no different from the inn-keepers he sings about and his wife, who deplores such acts knows but is unable to stop him from doing it. He makes his money by being an

Crime Scene Manager Roles and Responsibilities

Crime Scene Manager Roles and Responsibilities According to the lecture on crime scene management SAPS 2006 the process of crime scene management is as follows. The different role players within the SAPS respond to the crime scene with due consideration personal safety, while at same time looking for potential evidence and possible suspects. The researcher wants to determine whether the role players from the components such as the visible policing, detectives and the Local Criminal Record Centre attended the murder crime scenes with the purpose of obtaining the required evidential material for linking suspects with the crime scene and for court purposes, further to determine whether such role players has the expertise to identify possible suspects at the murder scenes, SAPS (2006). In terms of SAPS, DCLP (2006) and SAPS Policy Number 1 (2004) on crime scene management, the procedure in the crime scene of crime is as follows: The first member to arrive at the crime scene will receive the crime scene from the members of the public and immediately take control of the scene and identify the injured victims. The first member will establish the command centre and act as Acting Commander for the Centre until the Official Commander is appointed. The Acting Commander will administers all the resources as required by the crime scene role-players examples of such resources are visible policing, Specialized units, Emergency services, Defence Force units etc and if the scope of the crime scene escalates (i.e) incident where public order policing or the task force is required, a major aircraft crash or any major operation), the command centre will further supported by the establishment of a field joint operational centre. The establish excess routes to the crime scene for control purpose. The first member will hand over the crime scene to the appointed crime scene manager on arrival who will be accompanied by the detectives and the crime scene technician and conduct a detail inspection to determine certain key aspects of the crime scene. The crime scene manager, the crime scene technician and the investigating officer will gain on the first walk through plan and agree on the crime scene investigation, processing strategy and methodology which they will follow. The crime scene manager will appoints the investigating officer who will be the principal investigator and be responsible for the maintaining of the case docket, investigating officer to co-ordinates the investigating team and for the maintaining the investigation diary and keeping track of the whole process and the investigating team is responsible for information gathering and proceeds which the interviewing of witnesses and taking down statements (SAPS 2006). The crime manager will also appoints the crime scene technician who will be the principal processing expert on the crime scene and evaluates the evidence possibilities and assembles the processing team with the correct skills to effectively process the crime scene. Crime scene technician will be supported by specialists available to assist the processing team on the crime; such specialists are provided by the Forensic Science Laboratory, Pathology, etc. The processing team will prepare a realistic visual representation of the scene to a court of law (SAPS 2006). After the crime scene team has completed their activities in the crime scene, the crime scene manager will conducts a final walk through of the scene, accompanied by the investigating officer and the crime scene technician. The purpose of walk-through is to review the activity of the investigation and processing team, ensuring that the original plan has been executed. The crime scene manager will conduct a debriefing with all role players as the last opportunity to collect any wrong decision made during the process and to ensure that all required actions have been performed. The crime scene manager will restore the crime scene and ensuring that all equipments has been removed and authorised the crime scene to be released to the public (SAPS 2006). Sometime after the event the crime scene manager calls a meeting with all the relevant role players to evaluate the process for lessons learnt planning the on going investigation, commenced on successes and identify mistakes. Cox (2009) in her article, explains that in order to ensure that the evidence is protected, the first person at the crime scene should secure it with barriers and or crime scene tapes soon after arriving at the crime scene, in addition, some should act as security guard so that people who do not belong at the location are kept out of the crime scene. According to Lee, Palmbach Miller, (2001), the first responders to a crime scene are usually Police, Emergency Medical personnel or Fire Department personnel. Their actions at the scene are often the foundation for the successful resolution of the crime. These first responding Officers are also in many cases some of the individuals, who may, through the course of doing their job, inadvertently change or alter the crime scene from its original condition, Lee, et al (2001). They further emphasized that those persons must do their job but they must always keep in mind that they will begin the process of linking the crime scene to the victim, the witness and ultimately, to the suspect. Any disruption of the crime scene may prevent the link to the suspect. The critical matters such as training, education, experience are all necessary for any potential first responder Lee et al, (2001). The process to be followed according to Roland (2007) correspond with (SAPS 2006) in the sense that the first Officers to respond are responsible for the securing the crime scene and preserving it as they found it. This means ensuring that nothing is touched or moved so that any physical evidence is not compromised or contaminated, if there are victims displaying signs of life the Police will call a team of Paramedics to give on site assistance if they did not respond to the initial emergency call. The injured can then be removed to Hospital, but dead bodies need to be left as they were found since vital causes can be obtained from studying the position and condition of the victim. The senior investigating officer will begin by interviewing the officers who were first on the scene to get their initial impression of the location and the behaviour of those who were directly involved. In a murder enquiry the suspects residence will require searching as well as the site where the body of the victim has been discovered. Team is led by a crime scene controller who answers to a superior the superior then reports to the investigating officer. When the crime scene is a house, an apartment, commercial building or vehicle all which can be sealed off and examined in the minutes detail and if murder or violent attack has occurred in one area of a building . The whole property will be considered relevant to the case and will be scoured for clause. When exterior location Police may have to extend the perimeter to includes vehicle tyre tracks, footprints and areas where there is a change of finding personal items, discarded cigarettes butts, a weapon or trace evidence which might have been snagged on undergrowth. It is a burial site for murder victims. There could be other makeshift graves in the area all in which will save to be excavates, photographed and combined for physical evidence. Exterior scene may also have to be isolated by a tent to protect evidence from the effects of whether and to exclude the prying eyes of curiosity seekers and media Roland (2007). It is clear that the procedure for the first person to arrive at the scene of crime is to ensure that the crime is protected for potential evidence. Cox(2009), Lee, el at 2001) and Roland (2007) support the (SAPS1 (2004) on crime scene management as well as the SAPS DCLP (2006). Wayne, Patherick, Brent, Turvey, Claire Ferguson (2010) indicates that particular attention should be given to determine if this is the only scene or whether there are secondary crime scenes that need to be located. Investigators will have only a limited amount of time to work a crime site in its untouched state. The opportunity to permanently record the scene in its original state must not be lost, such records will not only be useful during an investigation but are also required for presentation at trial Wayne et al (2010). Wayne et al (2010) has also stated that it is important that upon arrival at the scene investigators implement crime scene procedures, supervise uniform personnel and provide direction to the investigation to facilitate this. An investigative team should be nominated. This team should consist of an arresting officer, a corroborating officer, and an exhibit officer. This procedure is standard in most Police services for any major crime. The exhibits officer is responsible for protection and collection of exhibits, through to the examination of exhibits and their final production in court cases. The arresting officer and the corroborating officer are responsible for interaction with suspects and have final responsibility prosecuting the matter to trial. This team should be overseen by a senior Detective who has a broad management role in ensuring that a major incident room (MIR) or command post is established to support and manage investigative functions at the crime scene and also at later stages of the investigations Wayne et al (2010). Furthermore Wayne et at (2010) elaborates the initial assessment stage of crime scene that the trained investigators should have control of the investigation and begin to identify possible witnesses and suspects they should begin this stage by evaluating physical evidence located with a view to assisting with suspect generation by prioritising the most evidence (e.g) DNA located at a scene is powerful evidence as compared to an un-identified item such as clothing). It is also at this point that the investigators should familiarise themselves with the victim by performing interviews with the victim if still alive, or alternatively by conducting a victim logy (or profile) if the victim is the deceased. The profile should include the history of the victim, associates, criminal links, family and financial records. This step is important because the characteristics of a victim can provide links to possible suspects in particular, investigators may be able to draw inferences about the offe nders motive, modus operandi, and signatures behaviour (Turvey, 1999). Having done this, the investigators should be able to know the information about the victim. Wayne et al (2010). According to Wayne et al (2010) during the investigation stage the investigators undertake the most challenging work. At this point investigators must attempt to establish a motive for the crime, if this can be done, it must be accurate, then this information will greatly assist in reducing the suspect pool. Witness account also need to be closely examined at this stage and evaluated as to the assistance they can build a profile for the suspect. In this stage investigators should be ensuring that trained experts are evaluating all available physical evidence. Wayne et al (2010) further explain about the target stage of having carried out thorough examination of the crime scene, investigators need to build a profile for potential suspects from evidence available during the target stage. The investigators should then test the velocity of the evidence by seeking links between the suspect and the crime. All available evidence needs to be channelled into providing a nexus between the susp ect and the victim, in relation to time, place and motive. It is at this point the investigators need to be fully conversant with the investigations gathered by investigators with regards to build a profile for potential suspects. The investigators should develop an investigative interview plan so that when the suspect is confronted, the investigators are clear of the direction and purpose of the action or questioning that they undertake in the arrest stage, Wayne (et al 2010). According to Jackson, Andrew and Jackson, Julie (2004) the duties of the first Police Officer attending and preservation of the crime scene is as follows: Maintain the value of any physical evidence that may be present. Carry out an initial assessment of the scene. Deal with any emergencies (the overriding duty of the first officer attending is to preserve life, irrespective of whether crucial evidence is destroyed in the process). Call for assistance as necessary. Preserve the scene (unless it has been decided that physical evidence will not be recovered. Make an appropriate records of his or her assessment and actions (included in this times at which any key events took place, such as the first officer attending arrival at the scene and any estimated time of the incident that may be available from, for example, eyewitnesses. Communicate his or her assessment and actions to those who will take over the responsibility for the processing of the scene and or those responsible for the investigation of the case. Provide appropriate information about the processing of the case to those members of the public who are directly involved. The fi rst officer attending the crime scene must during his or her initial assessment, ascertain whether any of the following are present or nearby. Injured persons victims. Eyewitnesses (who should be kept separate from one another, by the first officer attending need to avoid conversation between the eye witnesses that could distort their memories of the incident). Suspects (who must be kept separate from each other and from witnesses) it should be borne in mind that seemingly innocent might, in fact be suspects in case. Further Jackson et al (2004) provides that any crime scene from which physical evidence is recovered and recorded, this process is also known as documenting the crime scene. This is done by making written notes that are augmented by photographs, video recordings and or sketches, as appropriate Jackson et al (2004). Jackson et al (2004) also mentioned the following recording on the crime scene. There must be a record of each item of physical evidence recorded from the scene, detailing the identified of the person who recovered it, the time and date at which it was recorded, the exact location from which it was taken and a description of the item involved. A log of all images taken of the scene (whether by still photographing conventional digital or video recording) describing for each images. The exact location of the camera operator The identity of the camera operator The direction in which the camera was pointed. The time and date at which it was captured. Any special lighting or other conditions used. Any special light or other condition used. The items and / or area of the scene from which the image was captured. A log of any sketches made of the scene. A detailed description of the surroundings of the crime scene. A record of the conditions of whether and light that prevailed during the processing of the scene and a thorough description of the crime scene itself in the condition in which it was found prior to the removal of any physical evidence, including details or any features that might be of evidential worth (such as the location and condition of any likely points of the entry and or exits by the individuals involved in the incident). It is clear that on the crime scene the physical evidence needs to be protected for potential evidence. Wayne et al (2010) and Jackson et al (2004:19) support to each other in terms of the process of crime scene management. According to Savino, John, Brent and Turvey (2005) provides the information to be learned from the crime scene as follows: Investigators can experience the sights, smells and sound of the crime scene, as the victim and the offender perceived them. Investigators can experience the spatial relationship with the scene. Investigators can experience how open, or secluded the scene is, suggesting possible witnesses. Investigators can experience how accessible or hidden the scene is to those not from the area, suggesting possible suspect populations. Investigators can learn what kind of traffic (vehicle and pedestrian), residences or businesses are nearby, suggesting possible witnesses and suspect populations. Investigators can experience transfer evidence first hand, vegetation, soil, glass, fibres, and any other material that may have transferred on to the victim or offender may transfer on to them, providing examples of what to look for on suspect clothing or in suspects vehicles. Investigators can walk victim and offender routes themselves, seeing the sight first hand, in order to discover additional witnesses and suspect population. This witnesses can include businesses with active surveillance camera that may have recorded some or all of the crime Savino et al (2005). The attentive investigators may discover items of evidence previously thought lost and according to Savino and Turvey (2005) further elaborate the crime scene dos and donts that, locards exchange principle. Every contact result in a transfer of evidence contact between items in around and obliterate it. The investigator needs to be on the crime scene and have some contact with the evidence, as do Forensic personnel however, reasonable steps can be taken to minimize how much evidence is added, moved and obliterated consider the following guidelines. Do not enter the crime scene until you have signed in on the crime scene security log. If there is not a security log, start one. The security log should contain name, agency, function, time in and out, and clothing description for later exclusionary purposes. One person should be assigned to maintain the log. Make certain that someone is assigned to photograph the crime scene and surrounding areas. Part of this assignment involves maintaining a log of each roll of film and each item and location photograph. Make certain that someone is assigned to sketch the crime scene. A rough sketch should be prepared at the scene showing measurements between items of evidence and spatial relationships within the scene. A final or smooth sketch is prepared later, based on notes, photos, and other information gathered from the scene (Lee). Make certain that someone is assigned to maintain and evidence log. Do not collect multiple items of evidence in one bag or under one evidence number. This provides for potential cross -contamination. Wear disposable latex gloves at all times- this will help prevents the transfer of fingerprints, sweat, and other material from your bare hand on the scene. Change gloves every time you touch a new item on the scene. This will help prevent cross-contamination between items at the same that you have touched. Do not dispose gloves by carelessly discarding them in the scene. They could wind up in the crime scene photo obscuring evidence, or worse, somebody might collect them as evidence and run lab tests to determine their origin. Do not touch everything in sight. When you touch an object, you may move it from its original position or obliterate any evidence that may have been transferred to its surface during the crime, such as a fingerprints or biological fluids containing valuable DNA. Keep your hands in your pockets until they are needed. Do not wonder aimlessly through the crime scene. Do not touch, move or otherwise alter items of evidence before documenting them (photographs, measurements, etc) Do not stage collection effort from furniture involved in the crime. Set up your equipments elsewhere, away from areas of potential evidence transfer. Do not use the telephone on the scene. The offender may have used the phone. This evidence that should be seized and processed for fingerprints and other potential transfer evidence also, phone records should be checked for all incoming and outgoing local and long distance calls, as far back as possible. Do not use the television and / VCR at the scene. The offender may have used them, examine buttons for latent prints. Also, cable TV records should be checked both authors have worked cases where the offender has watched TV and / or ordered pornographic movies while waiting for the victim to return home. Do not use the bathroom. The offender may have the bathroom and may have lifted the toilet seat. The toilet should be seized and processed for fingerprints and other potential transfer evidence. Do not smoke, smoking changes smells of the air and results in hot ashes that have the potential to contaminate, melt, or even burn /ignite potential evidence. It also results in discarded cigarettes butts that may be confused as evidence. Do not eat into the crime scene and dropped food could contaminate or obliterate potential evidence. Do not drink. This is destruction and will results in refuse that could find its way into the crime scene and get more potential collected as evidence, also spilled liquids could contaminate or obliterate potential evidence. Do not spit, spitting result in the transfer of biological material into a crime scene. Do not bring civilians to a crime scene. This kind of thing show a lack of respect and professionalism, as well as introducing more potential transfer evidence into the scene and increasing the possibility that evidence may be carelessly contaminated or obliterated. Do not allow your superiors or colleagues to be civilians to a crime scene. Leave sealed containers sealed. Do not open sealed containers and sniff inside to determine the contents by odour. They may contain hazardours or toxic material such anhydrous ammonia, a necessary ingredient, especially the eye, skin, and respiratory tract will cause dehydration, cell destruction, and serve chemical burns. Do not touch pools of liquid in the crime scene. This is TV and movie behaviour done for dramatic effects to sell a scene, it has no place in real Forensic work. If you do not know what something is you think it is important follow the appropriate documentation and collection procedures and submit it to the LAB for analysis. Do not taste anything at the crime scene. This also TV behaviour done for dramatic effect to sell a scene, it has no place in real Forensic work. Do not interview the victim in the place where the attack occurred. This is extremely insensitive and may erode the trust between the victim and the investigator, to say nothing for potentially re-traumatising the victim. Do not leave the crime scene to get something to eat, play lotto, go back to the office, or work on something else, until you are done. Make written notes of everyone in the crime scene and each persons role. That way youll know whom to call later if you need statement. Take written notes of everything in the crime scene that get your attention because nothing is significant to record if it catches ones attention. Do not lead a victim family members from the crime scene through the area where there attack occurred unless there is no other way. Supervisors in charged of the crime scene with reviewing the work of an investigative unit do well to note those issues during performance reviews. They should also measure to ensure that once this kind of mistakes are discovered, they are not related. This can be accomplished by training and by the example set by seasoned investigators. Ignorance of physical evidence and protocol usually starts at the top, with those in charge and finds its way down through the ranks. Savino et al (2005). It is evident that members who attended the crime scene must follow the information guidelines of Savino et al (2005). According to Van Heerden (1982) the scene of crime can clarify, amongst others the following: The position of the deceased body and of various objects in relation to the body, can for example be important indications of the case of death. This means that whether the death is as results of murder, suicide or accident. The direction from which criminal approached the scene of crime and the manner in which the scene was left. The method used to commit the crime. The identity of the victim. The identity of the offender and the nature of his involvement in the crime. In view of the clarification as alluded by VAN HEERDEN (1982) it is important to illustrate how the potential evidence should be recognized, protected, recorded, collected and packaging, labelled or marked, submission for analysis, maintenance of chain of possession of presentation in court. Marais, Rooyen, Pretorius, De Beer, Smith and Mostert (1992) et al provides that the following legal requirements should be critical importance to the investigator. Before physical evidence can be collected it must obviously be recognized. In a murder investigation one usually concentrates on the weapon or object that was used that caused the death. A search is also made here for blood, hair, fibres and tissue in an effort to connect the criminal with the crime scene. Case and common sense should be always prevail with due precaution not to destroy physical evidence that may exist and the guidelines offered in this regard that the scene should be observed in its entirely and notes made of the location of all obvious physical clues, points of entry and exit signs of location (struggle) and the size and share in the area should be restricted and care taken not to destroy or to disturb any evidence during the examination, a suitable search method must be decided upon and during the search of an indoor scene. Special attention should be paid to fragile evidence that may be easily destroyed or contaminated. Places or objects where latent fingerprints may be found and other physical clues to be examined by the experts later need to be seemed. Comprehensive notes should also be made of all stains, spots, liquids and the like which could prove to have evidential value. The scene and surrounding areas must be demarcated off to ensure that valuable physical evidence is not destroyed or damaged by vehicles people or animals.

Hasidic Judaism Essay -- Judaism

Hasidic Judaism is a branch of Orthodox Judaism established in Eastern Europe during the 1800’s that put spirituality and a connection with God through mysticism at the forefront of its beliefs. In order to understand Hasidic Judaism, one must understand that Judaism is not only a religion; it is also a philosophy and a way of life for the Jewish people. One of the oldest monotheistic religions, Judaism has evolved over the years since the time of the founding fathers. Like any culture or religion, however, Jews have never been without conflict or disagreement amongst its people. Schisms amongst Jews over long periods of time have led to a branching out of sects and Jewish institutions. What led to the separation of denominations within was a fundamental disagreement on the interpretation and implementation of Halakah (Jewish religious law). Before the 18th century there was little differentiation between sects of Judaism; Jewry was based on Talmudic and Halakhic study and kno wledge. Constructed as an overly legalistic religion before the 18th century, the Hasidic movement popularized by Rabbi Israel Ben Eliezer sought to spread Judaism through the common man’s love of and devotion to God. Eastern European Jewry had established itself firmly amongst small villages in Poland since the 13th century . Remaining fairly stable, Jews in Poland uniformly followed and studied Rabbinic Judaism based on oral and Talmudic law. The only differences amongst Jewish Orthodox beliefs were between those who studied Jewish mysticism, or Kabbalah, and those who saw it as heretical. During the 17th century, the schism was brought into the spotlight by the False-Messianic movement of Shabbatai Tzvi, who was later forced to convert to Islam by the Ot... ...ity through mysticism allows the common man to feel importance, and to feel importance is one of the universal goals of man. Knowing this, Hasidism was a great fit for the type of communities it attracted, stemming from the psychological insight provided with Hasidism to answer the common person’s struggle with existence and self importance. Works Cited Elior, Rachel. The Mystical Origins of Hasidism. Oxford: Littman Library of Jewish Civilization, 2006. Print. Magid, Shaul. Hasidism on the Margin: Reconciliation, Antinomianism, and Messianism in Izbica/Radzin Hasidism. Madison, Wisc.: University of Wisconsin, 2003. Print. Mintz, Jerome R. Hasidic People: A Place in the New World. Cambridge, MA: Harvard UP, 1992. Print. Sears, Dovid. The Path of the Baal Shem Tov: Early Hasidic Teachings and Customs. Northvale, NJ: Jason Aronson, 1997. Print.

Manual vs. Automated Statistical Process Control in the Food Industries

Israel Ortega-Ramos The Prime Example Our recent visit to a food packaging plant in New Jersey highlighted the inconsistent results of statistical process control routinely faced by Quality Control Managers. Product weight readings were taken from the manufacturing floor, entered into an Excel spreadsheet and analyzed. The results produced no predictable under or over filling trend despite the fact that the same people used the same scales at the same time of day. The problem is simple and fundamental. Human error is an inevitable part of the process of collecting statistical data.This is consistently overlooked in companies that utilize manual SPC[1] (statistical process control) for their manufactured goods. To ensure the human error factor is eliminated, resulting in lower costs and increased profitability, manufactures must begin utilizing more â€Å"high-tech† means of collecting, analyzing, and storing SPC data. The Hidden Problems of the Current Manual SPC Process To be tter understand the core problem, and find a solution, it is pivotal to understand how this food packaging plant utilizes manual SPC.Generally, several samples are taken from a product line at different times of day, usually 15 or 20 samples at a time. These samples are then individually weighed; a line worker records the results on a clipboard for analysis. The individual weight readings are entered into a computer and various statistical calculations are derived from the weighing results, including frequency distribution charts and Pareto charts that are used to adjust the actual filling machines to deliver a consistent result.The Quality Manager must then resolve any conflict between under filling a package, which breaks government laws and overfilling a package which causes lost revenue. Using the diagram to get a better understanding of SPC will make it easier to locate the fundamental problems with the manual SPC system in use. The problems begin with the manual recording of 1 5 identical products by the line workers. The simple act of weighing an item then transferring the result to a clipboard by pencil or pen is flawed and full of possible errors, i. . the incorrect number can be recorded or a sample can be weighed accidentally more than once. This means the human emotion factor begins to play a large part in the problematic result. In addition, the manager obtains the clipboard results from the same worker who is required to climb inside the hot filling machine to adjust the volume if the weight results are not consistent. A line worker therefore might also assume that weight readings on the clipboard that differ from each other might mean he/she is not doing a good job.The underlying result of a manual SPC system is the company loses money resulting when each package of food is either overfilled beyond the nominal weight or worse being under-filled which could mean hefty government fines. To summarize, the current manual SPC process allows too many e rrors and offers no traceability of weighing results throughout the system. The implementation of an automated SPC scale system would eliminate these manual user errors with only a few changes and a small capital investment. The Advantages of an Automated SPC SystemDesigning an automatic SPC system that eliminates human error begins by removing the manual element from employee responsibility. This will alleviate human recording errors and the fudging of actual weight results. To accomplish this, the old scale, clipboard, and pencil must be removed and replaced with a scale system equipped with automated SPC software. This software is fully configurable to satisfy all SPC tolerances. The scale display will actually prompt the worker when to place a product on the scale.The fully automated â€Å"SPC Scale System† will not allow products placed on the scale to be removed; rather only permit the addition of new products. This will eliminate the possibility of placing the same pro duct on the scale more than once, as well as any confusion and/or fudging. The scale will then calculate the statistical data after the last product is placed on the scale and store this data in a password-protected memory for collection by the Quality Manager. This statistical data can then be sent wirelessly to a spreadsheet, printed on a label to accompany the sampled roduct, or simply viewed on the scale interface. The flow diagram below shows the improved SPC process. Companies can also utilize various connectivity and software options that can integrate filling machines to automated SPC scale systems. This means that fill volumes based on trends calculated by the scale can be adjusted via an automated system. Quality Control Managers and Plant Managers can also connect all the SPC scale systems in a factory via a central control computer that will provide easy access to â€Å"real-time† data.Integrating an automated SPC Scale System into a manufacturing environment will have the following advantages over the older manual SPC systems: Upgrading outdated manual SPC processes is the first step to improve overall quality, efficiency, and trace ability. This can be accomplished with as little as $5,000 in capital investment. Quality Control Managers and Plant managers have to take a hard look at how their product samples are being weighed and how these measurements are turned into results that can improve production line efficiency.It is now time for companies to step into the 21st century and upgrade to a fully automatic SPC weighing system. [pic] ———————– ———————– Error Filled SPC System START Statistical data evaluated and translated into adjustments to correct filling machine fill volumes. Data transferred from clipboard to spreadsheet for statistical evaluation. Each product is placed on scale. Random Batch of Product taken from Producti on Line.Filling machines manually adjusted according to collected data. Data collected by Quality Control Manager. Weight is recorded on clipboard in order weighed on scale. FINISH Optional Filling Machines adjusted automatically by SPC scale system. FINISH Random Batch of Product taken from Production Line. Each product is placed on scale. Scale automatically calculates statistical data. Statistical Data transferred to computer database directly via wireless or Ethernet connection. START Product Weight Scatter Graph.

How does Gaiman create a frightening atmosphere in the novel? Essay

Gaiman creates a frightening atmosphere in the novel by using different techniques. In chapter one Coraline’s new home is described in a horror way and is introduced in this quotation: â€Å"It was a very old house†¦Ã¢â‚¬  using the phrase â€Å"old house† often refers to horror films because the adjective â€Å"old† describes the house to have: ghost, cobwebs, peeled painting, sickly green weeds and to be neglected. Gaiman approaches the cat as strange and curious because it says: â€Å"†¦haughty black cat, which would sit on walls and tree stumps and watch her.† The cat is black which symbolises as a witch’s cat because it’s black, which makes the cat seem creepy. Also the cat is vain and proud because it says â€Å"haughty†. Describing the cat in this way makes you feel intimated. The quotation â€Å"who would sit on walls and tree stumps and watch her† feels like something is going to happen to her and the cat do esn’t want to miss any action because it says â€Å"†¦watch her.† Gaiman uses the technique personification in this quotation: â€Å"The cat shrugged†¦Ã¢â‚¬  to cause the scene to be creepy because cats don’t have shoulders and the cat is acting like a human, so this makes it: scary, strange and different. Also in chapter four he mentions Miss Spink and Miss Forcible being very horrifying in the quote â€Å"†¦thin, and pale, and quite pretty and had black-button eyes.† This quotation has a lot of adjectives including thin and pale which give a very ghostly image for them because pale is very white and so you look like a ghost and you have no soul. Gaiman has put Miss Spink and Miss Forcible with â€Å"black-button eyes† because it traps your eyes from showing any emotions and without that you do not have: a soul, character or personality. Gaiman then describes Coraline’s emotions in a different way that makes the atmosphere more frightening. The quotation says â€Å"She became certain that there was somethin g in the dark behind her: something very old and very slow. Her heart beat so hard and so loudly she was scared it would burst out of her chest.† Neil Gaiman is describing emotions without naming them: here, he shows us how scared Coraline is by describing the thumping of her heart because he writes â€Å"her heart beat so hard and so loudly† this means she was very terrified which then makes us feel that way. In chapter five Neil Gaiman describes the silence of Coraline’s flat which makes the reader feel very frightened. The quotation is â€Å"There was no other sound in the empty flat.† This quotation is frightening because it says there is â€Å"no other sound† and it is â€Å"empty†, which is the scariest thing because silence has an energy to it like no other source; therefore silence in a home can be quite disturbing and comfortable when alone. Gaiman then uses a technique, personification to make the scene: bizarre, abnormal and aberrant in the quotation â€Å"†¦the door was looking back at her.† This is a personification because doors can not look back! So this is strange and creepy and is used to emphasize unusual and vivid images or give inanimate objects feelings in order to show emotion. Gaiman uses another technique called alliteration to draw attention to the particular adjective and increase the itchiness it gives to you. The alliteration is in the quotation â€Å"A spider scuttled over the back of her hand†¦Ã¢â‚¬  When the adjective â€Å"scuttled† is used next to the noun â€Å"spider† it automatically gives you the quivers and shakes. Also in chapter 7 Gaiman uses old fashion English language to make the atmosphere seem like time has gone by so fast which make the ghost old. The quotation that the ghosts speak in old fashioned language is: â€Å"Art thou – art thou alive?† â€Å"Thou† is not used in today’s century which makes it an old fashioned word. Using this type of language makes the ghost old and that they have been trapped in the mirror by the mother whom they call â€Å"beldam† to describe her which means witch. A few sentences after that quotation he uses a technique called five senses; this is a techniques which describes something uses touch, smell, hearing, taste and sight. He uses one of senses called touch to give you a better image of the scene in the quotation: â€Å"She felt a cold hand touch her face†¦Ã¢â‚¬  Gaiman uses the sense touch to describe her face.